10G DAC Cable 1M Direct Attached Cable

The 10G DAC Cable 1M Direct Attached Cable is a short-distance network cable intended for connecting compatible 10 Gigabit networking equipment positioned close together. DAC, meaning Direct Attach Copper, is commonly used inside server racks and network cabinets where switches, servers, routers and network interface cards require a high-speed connection over a short distance.

At just 1 metre long, this cable is best suited to rack-level connections where long fibre or copper runs are unnecessary. Official networking documentation from major manufacturers confirms that 1-metre SFP+ Direct Attach Copper cables are commonly offered for short 10 Gigabit Ethernet connections.

The 10G DAC Cable 1M Direct Attached Cable is suitable for data centres, ISPs, enterprise server rooms, network integrators and businesses building short 10G links. Buyers should confirm the exact connector type and compatibility with both connected devices before ordering.

Key Features of 10G DAC Cable 1M Direct Attached Cable

• Designed for short-distance 10 Gigabit network connections

• 1 metre cable length

• Direct Attach Copper cable format

• Suitable for rack-level network connections

• Useful for connecting compatible switches and servers

• Can be used between compatible network switches

• Commonly used with compatible network interface cards

• Useful in server rooms and data-centre cabinets

• Integrated cable-and-connector design

• Reduces the need for a separate fibre patch cable and separate optical transceivers in compatible short-distance installations

• Suitable for enterprise and ISP network infrastructure

The exact manufacturer, electrical characteristics, cable gauge, coding and compatibility of the unit supplied should be confirmed before purchase.

10 Gigabit Network Connectivity

The 10G DAC Cable 1M Direct Attached Cable is designed for networking environments where a short 10 Gigabit connection is required.

10 Gigabit Ethernet provides substantially more network capacity than standard Gigabit Ethernet and is commonly used for servers, storage infrastructure, switch uplinks and network backbones.

The cable does not convert a lower-speed port into a 10G port. Both connected devices must provide compatible interfaces and support the required connection.

1-Metre Cable for Rack-Level Connections

The 1-metre length makes this cable especially useful when two devices are installed close together inside the same network cabinet or server rack.

Typical examples include:

• Server to network switch

• Switch to switch

• Network appliance to switch

• Storage system to compatible networking equipment

• Router or gateway to compatible switch

• Short links between rack-mounted devices

A shorter cable can also help reduce unnecessary cable loops inside a rack, making equipment easier to identify and maintain.

If the connected devices are positioned significantly farther apart, a longer DAC or an appropriate fibre solution may be required instead.

Direct Attach Copper Technology

Direct Attach Copper cables provide a direct electrical connection between compatible networking interfaces.

Unlike an optical connection, a DAC does not require a separate fibre patch cord between two optical transceiver modules. The connector assemblies are already integrated into the cable.

For supported short-distance connections, this can simplify the installation by reducing the number of individual components required.

Official Cisco documentation, for example, describes its SFP+ Twinax copper Direct Attach Cables as suitable for very short distances and for connections within racks and across adjacent racks.

The exact construction of the Tawa-supplied cable should still be confirmed from its specific manufacturer or supplier documentation.

Passive or Active DAC

Direct Attach Copper cables can be manufactured in passive or active versions.

Official Cisco documentation shows its 1-metre 10G SFP+ Twinax model as a passive cable. However, this does not automatically prove that every generic 1-metre DAC cable is passive.

For that reason, buyers who specifically require a passive DAC should confirm the specification of the exact unit supplied before purchasing.

Do not assume passive or active operation purely from cable length or appearance.

DAC Cable vs Fibre Connection

Both DAC and fibre can be used for high-speed networking, but they serve different deployment requirements.

A DAC is particularly useful for short connections between nearby devices. It combines the connectors and copper cable into one assembly, which can simplify rack cabling.

Fibre is generally preferred when significantly longer distances must be covered or when the network design specifically requires an optical connection.

For devices installed only about one metre apart, using a compatible DAC can avoid the need for:

• Two separate optical transceiver modules

• A separate fibre patch cable

• Additional optical components

The right option depends on the equipment, distance and network design.

Equipment Compatibility

Compatibility is one of the most important considerations when purchasing a 10G DAC Cable 1M Direct Attached Cable.

Not every DAC works with every switch, server or network interface card. Some networking manufacturers validate particular cables or apply vendor-specific compatibility requirements.

Before ordering, confirm the exact model numbers of the devices at both ends of the connection.

Equipment that may use DAC connections includes:

• Network switches

• Servers

• Network interface cards

• Routers

• Storage systems

• Firewalls

• Network appliances

• Data-centre equipment

Physical connector compatibility alone does not guarantee that a particular cable will be accepted by every piece of equipment.

Server-to-Switch Connections

One of the most common applications for a short DAC cable is connecting a server to a nearby network switch.

A server fitted with a compatible 10G network interface can use a DAC to connect directly to an appropriate switch installed in the same rack.

This type of installation is commonly found in server rooms, hosting environments and data centres where multiple high-bandwidth server connections are required.

Before installation, check compatibility on both the server network card and the switch.

Switch-to-Switch Connectivity

A 10G DAC Cable 1M Direct Attached Cable can also be used for short switch-to-switch connections when both devices support the required interface.

This can be useful where two switches are mounted close together and require a 10 Gigabit interconnection.

Possible applications include:

• Aggregation links

• Short backbone connections

• Rack-level switch interconnection

• Distribution-to-access switch links

The exact supported speed and configuration will depend on the connected equipment.

Best Uses for 10G DAC Cable 1M Direct Attached Cable

The cable is particularly suitable for:

• Data-centre racks

• Enterprise server rooms

• ISP networking equipment

• Server-to-switch links

• Switch-to-switch links

• Compatible storage networks

• Network laboratories

• Hosting infrastructure

• Virtualisation servers with supported 10G interfaces

• Short rack-level network interconnections

It is best used where the devices are close together and both ends support the required cable.

Cleaner Network Cabinet Installation

Short cables are often easier to manage inside network racks.

Using a 1-metre cable where only a short link is required can reduce unnecessary cable loops around switches, patch panels and servers.

Better cable organisation can make routine maintenance easier and can reduce confusion when tracing equipment connections.

The cable should still be installed without excessive bending, crushing or pulling.

Who Should Buy 10G DAC Cable 1M Direct Attached Cable?

This cable is suitable for users who already have compatible high-speed networking equipment and require a short connection.

Typical buyers include:

• IT departments

• Data-centre operators

• Internet service providers

• Network installers

• Enterprise businesses

• Hosting providers

• Systems integrators

• Server administrators

• Network engineers

For complete enterprise networking, structured cabling, fibre deployment or ISP infrastructure projects, OrbitLink Solutions can assist with professional network design and installation.

For purchasing the cable itself, Tawa remains the primary buying destination.

What to Check Before Buying

Before purchasing a 10G DAC Cable 1M Direct Attached Cable, confirm several important details.

Connector Type

Check that both connected devices use the correct interface for the cable.

Equipment Compatibility

Confirm that the switch, server, router or network interface card supports the specific DAC cable being supplied.

Cable Length

The cable is approximately 1 metre long and is intended for equipment positioned close together.

Required Network Speed

Confirm that both ports support the required networking speed.

Vendor Requirements

Some manufacturers restrict or validate third-party cables. Check the device manufacturer's compatibility documentation if necessary.

Passive or Active Requirement

Confirm whether the specific cable being supplied is passive or active if this matters to your installation.

Exact Manufacturer

If your equipment requires a specific compatibility-coded cable, verify the manufacturer and part number before ordering.

10G DAC Cable 1M Direct Attached Cable Price in Kenya

The 10G DAC Cable 1M Direct Attached Cable price in Kenya can vary depending on the manufacturer, compatibility, available stock and import costs.

A fixed Kenya price should not be assumed without checking the current product listing.

Pricing can be affected by:

• Manufacturer

• Compatibility coding

• Stock availability

• Exchange rates

• Shipping and import costs

• Quantity ordered

• Exact cable specification

For the latest 10G DAC Cable 1M Direct Attached Cable price in Kenya, check Tawa for current stock and pricing.

Businesses buying multiple cables for server racks or network deployments should confirm quantity availability before placing a bulk order.

Why Choose a 1M DAC Cable?

A 1-metre DAC makes the most sense when the two devices are already positioned close together.

For these short connections, the cable can provide a straightforward alternative to installing separate optical transceivers and fibre patch cords.

It is especially useful where buyers need:

• Short 10G rack connections

• Simple cable installation

• Less excess cabling

• Direct connections between compatible equipment

• Practical server and switch interconnection

Its suitability ultimately depends on the interfaces and compatibility requirements of the connected devices.

Buy 10G DAC Cable 1M Direct Attached Cable in Kenya

The 10G DAC Cable 1M Direct Attached Cable is designed for short, high-speed connections between compatible networking devices. Its 1-metre length makes it particularly useful for servers, switches, storage systems and other network equipment installed within the same rack or cabinet.

It is a suitable option for data centres, ISPs, enterprise networks and server rooms that require short 10 Gigabit connections. Buyers should confirm the exact connector format, equipment compatibility, manufacturer and passive or active specification before ordering.

To buy 10G DAC Cable 1M Direct Attached Cable in Kenya, shop through Tawa and confirm the current price, stock availability and exact specification of the supplied cable before completing your purchase.