Ubiquiti Rocket Prism Gen2 RP-5AC-Gen2 5GHz airMAX AC BaseStation

The Ubiquiti Rocket Prism Gen2 RP-5AC-Gen2 is a professional 5GHz outdoor wireless base station designed for Internet Service Providers (ISPs), enterprise networks, and wireless infrastructure deployments. Featuring Ubiquiti's advanced airMAX AC technology and airPrism active RF filtering, this high-performance wireless radio delivers reliable point-to-point (PtP) and point-to-multipoint (PtMP) connectivity in demanding networking environments.

Engineered for high-density wireless installations, the Ubiquiti Rocket Prism 5AC Gen2 supports manufacturer-advertised real TCP/IP throughput of up to 500+ Mbps for suitable PtP links using 80MHz channels and up to 330+ Mbps for PtMP links using 40MHz channels. Its integrated airPrism filtering helps reduce interference from neighboring wireless transmissions, making it particularly suitable for ISP towers, rooftop base stations, and wireless distribution networks.

The Rocket Prism Gen2 also features GPS synchronization capabilities, a dedicated 2.4GHz management radio, Gigabit Ethernet connectivity, and compatibility with suitable external 5GHz antennas. Whether expanding an ISP network, establishing wireless backhaul, or connecting remote business facilities, the RP-5AC-Gen2 provides the technology needed for professionally engineered outdoor wireless networks.

Key Features of Ubiquiti Rocket Prism Gen2 RP-5AC-Gen2

• 5GHz airMAX AC Technology: Proprietary wireless technology designed for high-capacity outdoor PtP and PtMP connectivity.

• Up to 500+ Mbps PtP Throughput: Manufacturer-advertised real TCP/IP performance with an 80MHz channel under suitable conditions.

• Up to 330+ Mbps PtMP Throughput: Advertised performance for multipoint deployments using a maximum 40MHz channel.

• airPrism Active RF Filtering: Helps reject adjacent-channel interference and improve wireless performance in high-density RF environments.

• GPS Synchronization: Supports coordinated transmissions between compatible co-located base stations with supported firmware.

• Gigabit Ethernet Port: One 10/100/1000 Mbps RJ45 interface for wired network connectivity.

• Dedicated 2.4GHz Management Radio: Enables convenient wireless access to the device's configuration interface during setup.

• External Antenna Support: Two waterproof RP-SMA connectors for compatible 5GHz antennas.

• Flexible Channel Bandwidth: Supports multiple bandwidth options for point-to-point and point-to-multipoint networks.

• 24V Passive PoE: Simplifies installation by delivering power through the Ethernet connection.

• Low Power Consumption: Maximum rated power consumption of 9.5W.

• Die-Cast Aluminum Enclosure: Provides robust construction for professional outdoor installations.

• airOS Management: Supports network monitoring, RF diagnostics, configuration, and troubleshooting.

airPrism Active RF Filtering for High-Density Wireless Networks

The Ubiquiti Rocket Prism Gen2 incorporates airPrism active RF filtering, one of its most important features for professional wireless network installations.

Wireless base stations frequently operate in environments containing multiple transmitting radios. ISP towers, commercial rooftops, and telecommunications installations can experience adjacent-channel interference that affects signal quality and overall network efficiency.

Ubiquiti's airPrism technology uses active filtering to reject unwanted signals outside the operating channel. According to the manufacturer, the technology can provide up to an additional 30+ dB of adjacent-channel interference rejection under applicable conditions.

This makes the RP-5AC-Gen2 particularly useful for:

• Wireless ISP towers with multiple installed radios.

• Rooftop wireless distribution installations.

• High-density point-to-multipoint networks.

• Wireless environments experiencing neighboring channel interference.

• Multi-sector wireless infrastructure deployments.

Although airPrism helps improve interference management, actual link performance still depends on channel planning, antenna isolation, signal strength, spectrum availability, and correct installation.

5GHz airMAX AC Wireless Performance

The Rocket Prism Gen2 uses Ubiquiti's proprietary airMAX AC technology, designed specifically for outdoor fixed wireless networking.

Unlike ordinary Wi-Fi equipment, airMAX AC uses a Time Division Multiple Access (TDMA) protocol to coordinate wireless transmissions between compatible devices.

This scheduling system helps manage airtime efficiently, particularly when multiple subscriber radios communicate with a central base station.

The RP-5AC-Gen2 supports two primary networking configurations.

Point-to-Point (PtP) Connectivity

In point-to-point deployments, the Rocket Prism Gen2 can establish a dedicated wireless link between two locations using compatible equipment and directional antennas.

Typical applications include connecting office buildings, establishing wireless backhaul between network sites, and linking remote facilities to an existing network.

The manufacturer advertises up to 500+ Mbps of real TCP/IP throughput for suitable airMAX AC PtP connections using an 80MHz channel.

Point-to-Multipoint (PtMP) Connectivity

In point-to-multipoint deployments, one Rocket Prism Gen2 base station can communicate with multiple compatible subscriber radios.

This configuration is commonly used by Wireless Internet Service Providers to distribute broadband connectivity from a central tower to customer premises.

Ubiquiti advertises up to 330+ Mbps of real TCP/IP throughput for suitable airMAX AC PtMP configurations using a 40MHz channel.

These throughput values are manufacturer-advertised capabilities rather than guaranteed connection speeds. Actual results depend on antenna selection, signal quality, interference, channel availability, and connected equipment.

Supported Channel Widths

The Ubiquiti RP-5AC-Gen2 supports different channel bandwidths depending on its operating mode.

Wider channels can support higher data throughput when sufficient clean spectrum is available. Narrower channels may be more suitable for environments where interference or frequency availability limits deployment options.

Actual operating channels and permitted transmit power must comply with local regulations.

GPS Synchronization for Multi-Sector Installations

The Ubiquiti Rocket Prism 5AC Gen2 includes GPS support for coordinated wireless base station operation.

GPS synchronization helps compatible co-located radios coordinate their transmission and reception timing. This is particularly useful when multiple wireless sectors operate from the same telecommunications tower or rooftop installation.

With suitable network planning, GPS synchronization can improve frequency reuse and reduce interference between nearby synchronized base stations.

The manufacturer's datasheet specifies that GPS synchronization support is available with airOS firmware version 8.3.0 and newer.

The GPS antenna must also have a suitable view of the sky for proper operation.

This feature makes the RP-5AC-Gen2 valuable for ISPs operating multi-sector networks where interference management and network stability are important.

Gigabit Ethernet and RF Interfaces

The Rocket Prism Gen2 includes a Gigabit Ethernet port for connecting the wireless radio to existing network infrastructure.

The Ethernet interface supports 10/100/1000 Mbps connectivity, allowing the device to integrate with compatible routers, network switches, and other wired networking equipment.

The radio also features dedicated external RF connectors for antenna connections.

The external RF connectors allow installers to pair the radio with appropriate sector or directional antennas based on the intended wireless network design.

The RP-5AC-Gen2 is a dedicated wireless base station radio, not a conventional multiport router or indoor Wi-Fi access point.

Dedicated Management Radio and airOS Network Management

The Rocket Prism Gen2 features a separate 2.4GHz management radio that simplifies initial configuration and troubleshooting.

According to Ubiquiti's installation documentation, management Wi-Fi access is available for a limited period after the radio is powered on. This allows technicians to connect to the configuration interface without initially connecting a computer through Ethernet.

The device uses Ubiquiti's airOS platform, which provides tools for wireless configuration, performance monitoring, and network diagnostics.

Supported capabilities include:

• Wireless signal and link monitoring.

• Network throughput statistics.

• Channel selection and frequency configuration.

• airView spectrum analysis.

• Antenna alignment tools.

• SNMP network monitoring.

• SSH remote administration.

• Web-based device management.

• Ping watchdog functionality.

• Traffic shaping and QoS controls.

• Packet error and Ethernet link statistics.

The airView spectrum analyzer is particularly useful for identifying RF activity and helping technicians select suitable operating channels.

The dedicated management radio is intended for device administration rather than providing conventional household Wi-Fi access.

Power Supply and 24V Passive PoE

The Ubiquiti Rocket Prism Gen2 RP-5AC-Gen2 uses passive Power over Ethernet, allowing electrical power and network data to share the Ethernet cable.

This simplifies outdoor installation because a separate electrical cable does not need to run directly to the radio.

The manufacturer's standard package includes a 24V, 1A Gigabit PoE adapter.

Important: The Rocket Prism Gen2 uses passive PoE. It should not be connected to an arbitrary 802.3af/at PoE source without confirming compatibility.

The correct output voltage and pin arrangement must be verified before installation.

For outdoor deployments, Ubiquiti recommends shielded Ethernet cabling, proper grounding, and suitable Ethernet surge protection.

Ubiquiti Rocket Prism Gen2 RP-5AC-Gen2 Technical Specifications

Note: The listed frequency range is the manufacturer's worldwide hardware capability. Actual frequencies, transmit power, and operating configurations depend on regional regulatory requirements.

Compatible Antennas and Wireless Installation

The Rocket Prism Gen2 is designed to operate with compatible external antennas, providing flexibility for different outdoor wireless network deployments.

For point-to-multipoint applications, installers can pair the radio with suitable 5GHz sector antennas to serve compatible customer premises equipment across a planned coverage area.

For point-to-point applications, compatible directional dish antennas can help establish focused wireless links between two network locations.

Ubiquiti identifies its airMAX AC sector and RocketDish AC antenna families as suitable options for corresponding deployments.

The radio does not include an integrated service antenna, so antenna selection is an important part of the installation.

For professional wireless infrastructure design, tower installations, and enterprise network deployment, OrbitLink Solutions provides networking services relevant to business and ISP connectivity projects.

Best Uses for Ubiquiti Rocket Prism Gen2

The Ubiquiti RP-5AC-Gen2 is suitable for several professional wireless networking applications in Kenya.

• Wireless Internet Service Providers: Deploying point-to-multipoint base stations for broadband distribution.

• ISP Tower Infrastructure: Establishing multi-sector wireless networks with improved interference management.

• Wireless Backhaul: Connecting network distribution sites using engineered point-to-point wireless links.

• Enterprise Networking: Linking offices, commercial facilities, and business premises across separate locations.

• Campus Connectivity: Establishing outdoor wireless connections between institutional buildings.

• Rural Broadband Distribution: Extending compatible wireless infrastructure into locations with limited wired connectivity.

• Network Expansion: Adding compatible wireless sectors or upgrading existing airMAX infrastructure.

Successful deployment requires appropriate antennas, compatible subscriber radios, clear or sufficiently unobstructed link paths, and correct RF planning.

Who Should Buy Ubiquiti Rocket Prism Gen2?

The Ubiquiti Rocket Prism Gen2 RP-5AC-Gen2 is designed primarily for professional networking environments.

It is suitable for wireless ISPs expanding their distribution networks, telecommunications installers deploying outdoor base stations, and enterprise IT teams implementing wireless connections between facilities.

Network engineers managing installations with multiple co-located radios may particularly benefit from the device's airPrism active RF filtering and GPS synchronization features.

However, the RP-5AC-Gen2 is not intended to replace an ordinary home Wi-Fi router. Customers looking for indoor wireless coverage should consider equipment specifically designed for conventional Wi-Fi clients.

What's in the Box?

The manufacturer's standard RP-5AC-Gen2 package includes the following items.

A compatible external 5GHz service antenna is not listed among the standard included items and should be selected separately.

Confirm the package contents and any additional accessories with Tawa before purchase.

Ubiquiti Rocket Prism Gen2 RP-5AC-Gen2 Price in Kenya

The Ubiquiti Rocket Prism Gen2 RP-5AC-Gen2 price in Kenya may vary depending on stock availability, exchange rates, shipping expenses, importation costs, and accessories included.

Customers planning an outdoor wireless installation should also budget for compatible antennas, shielded Ethernet cables, surge protection equipment, and mounting accessories where required.

For updated product pricing and purchasing inquiries, visit Tawa Kenya to confirm the latest price and availability.

What to Check Before Buying Ubiquiti Rocket Prism Gen2

Before ordering the Rocket Prism Gen2, consider the following:

• Exact Model Number: Confirm that the device is RP-5AC-Gen2.

• Antenna Compatibility: Select the appropriate external 5GHz antenna for the intended deployment.

• Wireless Compatibility: Verify compatibility with the remote airMAX equipment and intended operating configuration.

• Power Requirements: Ensure the installation uses suitable 24V passive PoE equipment.

• Installation Accessories: Check requirements for mounting hardware, shielded Ethernet cabling, grounding, and surge protection.

• Frequency Compliance: Confirm that planned wireless frequencies and transmission power comply with applicable Kenyan regulations.

• GPS Synchronization: Use compatible equipment and supported firmware if synchronization is required.

• Network Design: Evaluate interference, antenna alignment, line of sight, link distance, and expected network capacity.

• Package Contents: Confirm the included accessories and whether an external antenna must be purchased separately.

These considerations help buyers select appropriate equipment and avoid compatibility issues during deployment.

Buy Ubiquiti Rocket Prism Gen2 RP-5AC-Gen2 in Kenya

The Ubiquiti Rocket Prism Gen2 RP-5AC-Gen2 is a capable outdoor wireless base station for ISPs, enterprise networking professionals, and telecommunications installers who require reliable point-to-point and point-to-multipoint connectivity. Its combination of airMAX AC technology, airPrism active RF filtering, GPS synchronization support, and Gigabit Ethernet connectivity makes it suitable for professionally designed wireless distribution networks.

Whether you are upgrading an ISP tower, extending connectivity between business premises, or deploying a wireless backhaul link, the Rocket Prism Gen2 provides valuable features for managing demanding outdoor wireless environments. Before ordering, confirm antenna compatibility, passive PoE requirements, regulatory compliance, and the accessories needed for your installation.

Looking to buy the Ubiquiti Rocket Prism Gen2 RP-5AC-Gen2 in Kenya? Visit Tawa today to check the latest price, confirm stock availability, and inquire about compatible wireless networking accessories. Shop Ubiquiti Rocket Prism Gen2 at Tawa and get the right equipment for your next professional wireless connectivity project.